Automatic Straight Upcut Saw with Auto Feeding Ø500 mm
- Fully automatic straight upcut saw designed to cut aluminum and non-ferrous metals fast and precise. Cutting in bulk or single piece at 90 ° angle
- Double Servo motor control system enables cutting by entering data such as cutting length, cutting height, cutting speed on the screen
- The movable table profile does not leave marks on the saw-cut surfaces thanks to its pushing feature from below and from the opposite side
- Fast and smooth operation thanks to user friendly screen interface
- Max. 600 mm profile length can be fed per cycle. Precise cutting at any length thanks to repeat infeed
- Min. cutting length is 5 mm
- Standard berthing distanca: 175 mm
- Min. berthing distance: 110 mm* (ask)
- Idle Material Infeed Speed: 10,000 mm/min.
- Idle Material Cutting Speed: 10,000 mm/min.
- Thanks to save feature you can generate multiple cut lists where you can enter data such as pieces, bulk quantity, cut speed, height
- 7 “High resolution touch screen
- Thanks to its special manifold system it is easy to transfer chips out of the saw even if there is no chip collector involved
- Saw blade lubrication system where the spray amount can be adjusted on the screen
- Sensibility : ± 0,2 mm
| Cutting Motor: | 3 kW, 4 HP 400 V, 50/60 Hz |
| Saw Dimension: | D=500 mm d=30-32 mm |
| Saw Revolution: | 3000 rpm |
| Bar / Air Cons.: | 6-8 Bar, 50lt/min |
| Packing Size: | 170x110x155 cm |
| Machine Size: | 154x121x139 cm |
| Machine Kg: | 520 |
- 1 pc. Ø500 mm saw blade
- 3+3 pcs. pneumatic clamps
- KN-M3 conveyor (3 m)
- Bundle Cutting Kit
- Pneumatic spray mist lubrication system
- Screw shaft lubrication unit
- Air blow gun
- 2 pcs. chip collection manifolds
- Movable table, part lifting and reverse push features
- Automatically opening top guard
- Min. 4 mm thick cutting feature
- A second saw blade can be installed in addition to the existing one, and a second operation performed on the material (Please contact us for optional features)
Have you reviewed our other machines?
